Hallo
habe Probleme squid3 zum laufen zu bringen:
meine squid.conf schaut folgender massen aus:
Die Aushabe schaut wie folgt aus:
woran kann das liegen?
Danke für Aufklärung.
das block.sh script:
#!/bin/sh
echo "OK"
habe Probleme squid3 zum laufen zu bringen:
meine squid.conf schaut folgender massen aus:
Code:
cache_access_log /dev/null
cache_store_log none
cache_log /dev/null
external_acl_type VERIFIED ttl=60 %DST /etc/squid/block.sh
acl gesperrt external VERIFIED
http_access allow gesperrt
acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#
# Recommended minimum Access Permission configuration:
#
# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost
# And finally deny all other access to this proxy
http_access deny all
# Squid normally listens to port 3128
http_port 3128
# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /usr/local/squid/var/cache/squid 100 16 256
# Leave coredumps in the first cache dir
coredump_dir /usr/local/squid/var/cache/squid
# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
Die Aushabe schaut wie folgt aus:
Code:
# /usr/local/squid/sbin/squid -f /etc/squid/squid.conf -N -d 1
2012/10/08 20:48:04| Starting Squid Cache version 3.2.2 for x86_64-unknown-linux-gnu...
2012/10/08 20:48:04| Process ID 18775
2012/10/08 20:48:04| Process Roles: master worker
2012/10/08 20:48:04| With 1024 file descriptors available
2012/10/08 20:48:04| Initializing IP Cache...
2012/10/08 20:48:04| DNS Socket created at [::], FD 5
2012/10/08 20:48:04| DNS Socket created at 0.0.0.0, FD 6
2012/10/08 20:48:04| Adding nameserver 192.168.178.1 from /etc/resolv.conf
2012/10/08 20:48:04| helperOpenServers: Starting 0/5 'ncsa_auth' processes
2012/10/08 20:48:04| helperOpenServers: No 'ncsa_auth' processes needed.
2012/10/08 20:48:04| helperOpenServers: Starting 5/5 'block.sh' processes
2012/10/08 20:48:04| Logfile: opening log /dev/null
2012/10/08 20:48:04| WARNING: log parameters now start with a module name. Use 'stdio:/dev/null'
2012/10/08 20:48:04| Store logging disabled
2012/10/08 20:48:04| Swap maxSize 0 + 262144 KB, estimated 20164 objects
2012/10/08 20:48:04| Target number of buckets: 1008
2012/10/08 20:48:04| Using 8192 Store buckets
2012/10/08 20:48:04| Max Mem size: 262144 KB
2012/10/08 20:48:04| Max Swap size: 0 KB
2012/10/08 20:48:04| Using Least Load store dir selection
2012/10/08 20:48:04| Current Directory is /home/jkallup/Downloads/squid-3.2.2
2012/10/08 20:48:04| Loaded Icons.
2012/10/08 20:48:04| HTCP Disabled.
2012/10/08 20:48:04| Squid plugin modules loaded: 0
2012/10/08 20:48:04| Accepting HTTP Socket connections at local=[::]:3128 remote=[::] FD 18 flags=9
2012/10/08 20:48:04| WARNING: kallup_db #3 exited
2012/10/08 20:48:04| Too few kallup_db processes are running (need 1/5)
2012/10/08 20:48:04| Closing HTTP port [::]:3128
2012/10/08 20:48:04| storeDirWriteCleanLogs: Starting...
2012/10/08 20:48:04| Finished. Wrote 0 entries.
2012/10/08 20:48:04| Took 0.00 seconds ( 0.00 entries/sec).
FATAL: The kallup_db helpers are crashing too rapidly, need help!
woran kann das liegen?
Danke für Aufklärung.
das block.sh script:
#!/bin/sh
echo "OK"