Hallo zusammen,
ich habe folgendes Problem. Ich habe auf unserem Firmenserver XEN installiert um diverse vServer einrichten zu können. Die Erstellung der vServer klappt ohne Probleme. Nur wenn man sich mit z.b. xm console test.de in einen vServer einloggt und versucht eine Internetseite anzupingen, bekommt man nur Fehlermeldung, dass die Domain nicht existiert. Auch der Befehl apt-get update wird mit Fehlern abgewiesen:
notebookgalerie:~# xm console test.de
Linux version 2.6.18-6-xen-686 (Debian 2.6.18.dfsg.1-18etch5) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sat May 24 14:16:03 UTC 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
NX (Execute Disable) protection: active
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 67584
Kernel command line: root=/dev/sda1 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 2210.046 MHz processor.
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-f51fe000, maxmem 2d7fe000
Memory: 244864k/270336k available (1580k kernel code, 16976k reserved, 588k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5526.77 BogoMIPS (lpj=11053540)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 10922k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
PCI: System does not support PCI
PCI: System does not support PCI
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1218452470.429:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Xen virtual console successfully installed as tty1
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
netfront: device eth0 has flipping receive path.
Registering block device major 8
Freeing unused kernel memory: 148k freed
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
FATAL: Error inserting fan (/lib/modules/2.6.18-6-xen-686/kernel/drivers/acpi/fan.ko): No such device
FATAL: Error inserting thermal (/lib/modules/2.6.18-6-xen-686/kernel/drivers/acpi/thermal.ko): No such device
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Begin: Loading MD modules ...
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 8957.000 MB/sec
raid5: using function: pIII_sse (8957.000 MB/sec)
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
raid6: int32x1 978 MB/s
raid6: int32x2 968 MB/s
raid6: int32x4 937 MB/s
raid6: int32x8 625 MB/s
raid6: mmxx1 1716 MB/s
raid6: mmxx2 3294 MB/s
raid6: sse1x1 1584 MB/s
raid6: sse1x2 2484 MB/s
raid6: sse2x1 2852 MB/s
raid6: sse2x2 3200 MB/s
raid6: using algorithm sse2x2 (3200 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
Success: loaded module raid456.
Done.
Begin: Assembling all MD arrays ...
md: md0 stopped.
mdadm: no devices found for /dev/md0
Failure: failed to assemble all arrays.
Done.
Done.
Begin: Running /scripts/local-premount ...
Done.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
INIT: version 2.86 booting
* Mount point '/dev/shm' does not exist. Skipping mount.
Activating swap...Adding 131064k swap on /dev/sda2. Priority:-1 extents:1 across:131064k
done.
Checking root file system...fsck 1.40-WIP (14-Nov-2006)
/dev/sda1: clean, 28041/524288 files, 176141/1048576 blocks
done.
EXT3 FS on sda1, internal journal
Setting the system clock..
Cleaning up ifupdown....
Loading kernel modules...done.
Loading device-mapper supportdevice-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
.
Checking file systems...fsck 1.40-WIP (14-Nov-2006)
done.
Setting kernel variables...done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...SIOCADDRT: Network is unreachable
Failed to bring up eth0.
done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
* Not starting internet superserver: no services enabled.
Starting OpenBSD Secure Shell server: sshdNET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
.
Starting periodic command scheduler: crond.
Debian GNU/Linux 4.0 test.de tty1
test.de login: root
Last login: Mon Aug 11 08:26:46 2008 on tty1
Linux test.de 2.6.18-6-xen-686 #1 SMP Sat May 24 14:16:03 UTC 2008 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
test:~# apt-get update.
E: Invalid operation update.
test:~# apt-get update
Err http://security.debian.org stable/updates Release.gpg
Temporary failure resolving 'security.debian.org'
Err http://ftp.de.debian.org etch Release.gpg
Temporary failure resolving 'ftp.de.debian.org'
Failed to fetch http://ftp.de.debian.org/debian/dists/etch/Release.gpg Temporary failure resolving 'ftp.de.debian.org'
Failed to fetch http://security.debian.org/dists/stable/updates/Release.gpg Temporary failure resolving 'security.debian.org'
Reading package lists... Done
E: Some index files failed to download, they have been ignored, or old ones used instead.
test:~#
Hier habt ihr mal einen kleinen Auszug aus Putty... Ich bitte euch mir zu helfen. Vielen Dank!
ich habe folgendes Problem. Ich habe auf unserem Firmenserver XEN installiert um diverse vServer einrichten zu können. Die Erstellung der vServer klappt ohne Probleme. Nur wenn man sich mit z.b. xm console test.de in einen vServer einloggt und versucht eine Internetseite anzupingen, bekommt man nur Fehlermeldung, dass die Domain nicht existiert. Auch der Befehl apt-get update wird mit Fehlern abgewiesen:
notebookgalerie:~# xm console test.de
Linux version 2.6.18-6-xen-686 (Debian 2.6.18.dfsg.1-18etch5) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sat May 24 14:16:03 UTC 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
NX (Execute Disable) protection: active
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 67584
Kernel command line: root=/dev/sda1 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 2210.046 MHz processor.
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-f51fe000, maxmem 2d7fe000
Memory: 244864k/270336k available (1580k kernel code, 16976k reserved, 588k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5526.77 BogoMIPS (lpj=11053540)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 10922k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
PCI: System does not support PCI
PCI: System does not support PCI
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1218452470.429:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Xen virtual console successfully installed as tty1
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI No-Shortcut mode
netfront: device eth0 has flipping receive path.
Registering block device major 8
Freeing unused kernel memory: 148k freed
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
FATAL: Error inserting fan (/lib/modules/2.6.18-6-xen-686/kernel/drivers/acpi/fan.ko): No such device
FATAL: Error inserting thermal (/lib/modules/2.6.18-6-xen-686/kernel/drivers/acpi/thermal.ko): No such device
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Begin: Loading MD modules ...
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 8957.000 MB/sec
raid5: using function: pIII_sse (8957.000 MB/sec)
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
raid6: int32x1 978 MB/s
raid6: int32x2 968 MB/s
raid6: int32x4 937 MB/s
raid6: int32x8 625 MB/s
raid6: mmxx1 1716 MB/s
raid6: mmxx2 3294 MB/s
raid6: sse1x1 1584 MB/s
raid6: sse1x2 2484 MB/s
raid6: sse2x1 2852 MB/s
raid6: sse2x2 3200 MB/s
raid6: using algorithm sse2x2 (3200 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
Success: loaded module raid456.
Done.
Begin: Assembling all MD arrays ...
md: md0 stopped.
mdadm: no devices found for /dev/md0
Failure: failed to assemble all arrays.
Done.
Done.
Begin: Running /scripts/local-premount ...
Done.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
INIT: version 2.86 booting
* Mount point '/dev/shm' does not exist. Skipping mount.
Activating swap...Adding 131064k swap on /dev/sda2. Priority:-1 extents:1 across:131064k
done.
Checking root file system...fsck 1.40-WIP (14-Nov-2006)
/dev/sda1: clean, 28041/524288 files, 176141/1048576 blocks
done.
EXT3 FS on sda1, internal journal
Setting the system clock..
Cleaning up ifupdown....
Loading kernel modules...done.
Loading device-mapper supportdevice-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
.
Checking file systems...fsck 1.40-WIP (14-Nov-2006)
done.
Setting kernel variables...done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...SIOCADDRT: Network is unreachable
Failed to bring up eth0.
done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
* Not starting internet superserver: no services enabled.
Starting OpenBSD Secure Shell server: sshdNET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
.
Starting periodic command scheduler: crond.
Debian GNU/Linux 4.0 test.de tty1
test.de login: root
Last login: Mon Aug 11 08:26:46 2008 on tty1
Linux test.de 2.6.18-6-xen-686 #1 SMP Sat May 24 14:16:03 UTC 2008 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
test:~# apt-get update.
E: Invalid operation update.
test:~# apt-get update
Err http://security.debian.org stable/updates Release.gpg
Temporary failure resolving 'security.debian.org'
Err http://ftp.de.debian.org etch Release.gpg
Temporary failure resolving 'ftp.de.debian.org'
Failed to fetch http://ftp.de.debian.org/debian/dists/etch/Release.gpg Temporary failure resolving 'ftp.de.debian.org'
Failed to fetch http://security.debian.org/dists/stable/updates/Release.gpg Temporary failure resolving 'security.debian.org'
Reading package lists... Done
E: Some index files failed to download, they have been ignored, or old ones used instead.
test:~#
Hier habt ihr mal einen kleinen Auszug aus Putty... Ich bitte euch mir zu helfen. Vielen Dank!
