Hallo!
Hylafax 4.2.3 in opensuse 10.0 faxt nicht.
Fritz!DSL-Card geht, mit "capifax" kann ich faxen.


Ich erhalte folgende Fehlermail:

Your facsimile job to 012121234567890 could not be completed before the appointed deadline.

---- Unsent job status ----

Destination: 012121234567890
JobID: 1
GroupID: 1
Sender: root
Mailaddr: root@linux.site
Submitted From: localhost
Page Width: 209 (mm)
Page Length: 296 (mm)
Resolution: 196 (lpi)
Status: Kill time expired
Dialogs: 0 (exchanges with remote device)
Dials: 0 (consecutive failed calls to destination)
Calls: 0 (total phone calls placed)
Pages: 0 (pages transmitted)
TotPages: 0 (total pages to transmit)
Attempts: 0 (attempts to send current page)
Dirnum: 0 (directory of next page to send)

---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed. Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename Size Type
docq/doc1.ps.1 6150 Unknown document type

linux:~ # cat /var/log/sendfax.log

--
12/29 05:14:30 sendfax: interim release 1.1.33-Apr10
12/29 05:14:30 sendfax.c compiled at Sep 13 2005, 00:39:10
12/29 05:14:30 sending fax to /etc/mtab
12/29 05:14:30 exit_usage: no files to send: Success
12/29 05:14:30 ##### failed: command line error

--
12/29 05:14:53 sendfax: interim release 1.1.33-Apr10
12/29 05:14:53 sendfax.c compiled at Sep 13 2005, 00:39:10
12/29 05:14:53 sending fax to 012121234567890
12/29 05:14:53 checking /etc/mtab
12/29 05:14:53 makelock(ttyS1) called
12/29 05:14:53 do_makelock: lock='/var/lock/LCK.yS1'
12/29 05:14:53 lock made
12/29 05:14:53 tss: set speed to 38400 (017)
12/29 05:14:53 tio_set_flow_control( HARD )
12/29 05:14:53 yS1 fax_open_device succeeded, ttyS1 -> 5
12/29 05:14:53 yS1 reading specific data for port 'ttyS1'
12/29 05:14:53 yS1 reading /etc/mgetty+sendfax/sendfax.config...
12/29 05:14:53 yS1 conf lib: read: 'verbose y'
12/29 05:14:53 yS1 conf lib: read: 'debug 5'
12/29 05:14:53 yS1 conf lib: read: 'fax-devices ttyS1:ttyS2'
12/29 05:14:53 yS1 conf lib: read: 'fax-id 49 115 xxxxxxxx'
12/29 05:14:53 yS1 conf lib: read: 'max-tries 3'
12/29 05:14:53 yS1 conf lib: read: 'max-tries-continue y'
12/29 05:14:53 yS1 key: 'fax-devices', type=1, flags=4, data=(ignored)
12/29 05:14:53 yS1 key: 'modem-init', type=1, flags=0, data=(empty)
12/29 05:14:53 yS1 key: 'modem-handshake', type=1, flags=0, data=(empty)
12/29 05:14:53 yS1 key: 'modem-type', type=1, flags=1, data=auto
12/29 05:14:53 yS1 key: 'modem-quirks', type=0, flags=0, data=(empty)
12/29 05:14:53 yS1 key: 'fax-send-flow', type=4, flags=1, data=7
12/29 05:14:53 yS1 key: 'fax-rec-flow', type=4, flags=1, data=7
12/29 05:14:53 yS1 key: 'max-tries', type=0, flags=3, data=3
12/29 05:14:53 yS1 key: 'max-tries-continue', type=3, flags=3, data=TRUE
12/29 05:14:53 yS1 key: 'speed', type=0, flags=1, data=38400
12/29 05:14:53 yS1 key: 'switchbd', type=0, flags=1, data=0
12/29 05:14:53 yS1 key: 'open-delay', type=0, flags=0, data=(empty)
12/29 05:14:53 yS1 key: 'ignore-carrier', type=3, flags=1, data=TRUE
12/29 05:14:53 yS1 key: 'dial-prefix', type=1, flags=1, data=ATD
12/29 05:14:53 yS1 key: 'fax-id', type=1, flags=3, data=49 115 xxxxxxxx
12/29 05:14:53 yS1 key: 'poll-dir', type=1, flags=1, data=.
12/29 05:14:53 yS1 key: 'normal-res', type=3, flags=2, data=TRUE
12/29 05:14:53 yS1 key: 'fax-min-speed', type=0, flags=1, data=0
12/29 05:14:53 yS1 key: 'fax-max-speed', type=0, flags=1, data=14400
12/29 05:14:53 yS1 key: 'debug', type=0, flags=3, data=5
12/29 05:14:53 yS1 key: 'verbose', type=3, flags=3, data=TRUE
12/29 05:14:53 yS1 key: '', type=3, flags=1, data=FALSE
12/29 05:14:53 yS1 key: 'page-header', type=1, flags=0, data=(empty)
12/29 05:14:53 yS1 key: '', type=3, flags=1, data=FALSE
12/29 05:14:53 yS1 key: '', type=3, flags=1, data=FALSE
12/29 05:14:53 yS1 key: '', type=1, flags=1, data=
12/29 05:14:53 yS1 tss: set speed to 38400 (017)
12/29 05:14:53 yS1 mdm_send: 'ATV1Q0'
12/29 05:15:03 yS1 Warning: got alarm signal!
12/29 05:15:03 yS1 mdm_read_byte: read returned -1: Interrupted system call
12/29 05:15:03 yS1 mdm_get_line: cannot read byte, return: Interrupted system call -> ERROR
12/29 05:15:04 yS1 mdm_send: 'ATV1Q0'
12/29 05:15:06 ##### failed: got signal 2, pid=17896, dev=ttyS1, time=0s, acct=""

12/29 05:15:06 yS1 removing lock file

Die Einträge sind alt, aktuelle werden nicht geschrieben.

linux:~ # sendfax -v -d 01212xxx /etc/mtab
match against (..., 369)
rule: offset 0 string = "%!" -- failed (comparison)
rule: offset 0 short = 0x4d4d -- failed (comparison)
rule: offset 0 short = 0x4949 -- failed (comparison)
rule: offset 0 short = 0x1da -- failed (comparison)
rule: offset 0 short = 0x1f1e -- failed (comparison)
rule: offset 0 short = 0x1f9d -- failed (comparison)
rule: offset 0 short = 0x506 -- failed (comparison)
rule: offset 0 short = 0x5343 -- failed (comparison)
rule: offset 0 short = 0xf702 -- failed (comparison)
rule: offset 0 string = "GIF" -- failed (comparison)
rule: offset 0 long = 0x59a66a95 -- failed (comparison)
rule: offset 0 string = "%PDF" -- failed (comparison)
rule: offset 0 string = "x T psc" -- failed (comparison)
rule: offset 0 string = "begin" -- failed (comparison)
rule: offset 0 string = "xbtoa" -- failed (comparison)
rule: offset 0 string = "P1" -- failed (comparison)
rule: offset 0 string = "P2" -- failed (comparison)
rule: offset 0 string = "P3" -- failed (comparison)
rule: offset 0 string = "P4" -- failed (comparison)
rule: offset 0 string = "P5" -- failed (comparison)
rule: offset 0 string = "P6" -- failed (comparison)
rule: offset 0 string = "WNGZWZSS" -- failed (comparison)
rule: offset 0 string = "#Inventor V" -- failed (comparison)
rule: offset 0 string = "\x89PNG" -- failed (comparison)
rule: offset 0 short = 0xffd8 -- failed (comparison)
rule: offset 0 short = 0xd8ff -- failed (comparison)
rule: offset 0 string = "#FIG" -- failed (comparison)
rule: offset 0 ascii = -- success (result postscript, rule "%F/textfmt -B -f Courier-Bold -Ml=0.4in -p 11 -s %s >%o <%i")
CONVERT "/usr/sbin/textfmt -B -f Courier-Bold -Ml=0.4in -p 11 -s default >/tmp//sndfaxOkEbNr </etc/mtab"
Apply DisplayNumber rules to "01212xxx"
--> return result "01212xxx"
COVER SHEET "/usr/bin/faxcover -f 'root' -n '01212xxx' -s 'default' -p '1'"
request id is 3 (group id 3) for host localhost (1 file)

linux:/var/spool/hylafax/etc # faxstat -v
Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.
220 linux.site server (HylaFAX (tm) Version 4.2.3) ready.
-> USER root
230 User root logged in.
-> PORT 127,0,0,1,4,21
200 PORT command successful.
-> LIST status
150 Opening new data connection for "status".
HylaFAX scheduler on linux.site: Running
226 Transfer complete.

Auch mit Hylafax 4.2.4 gehts nicht.
Scheint als würde Hylafax die Empfängernummer nach der 12. Stelle abschneiden.

capi4hylafax 4.2.1-11 ist buggy.
nach einem Downgrade auf 4.2.1-4.2 gehts.